Has your epoxy garage floor lost its initial shine? Maybe it’s peeling, cracking, or turning yellow, especially if you’re in a sunny East Texas community like Flint. If so, it may be time for an upgrade. Many homeowners today are turning to polyaspartic garage coatings, a superior alternative to traditional epoxy. Below, we’ll explore the common signs your epoxy floor is failing, why polyaspartic is an excellent solution, and how the upgrade process works.
Signs Your Epoxy Floor Is Failing
One of the most disheartening things about epoxy is that it can look fantastic initially – only to degrade over time, especially if surface prep wasn’t done properly or if it’s exposed to intense sunlight and high temperatures.
Peeling or Flaking
Cause: Often stems from moisture trapped beneath the epoxy or insufficiently prepared concrete.
Impact: Creates unsightly areas where the coating lifts up, exposing bare or cracked concrete underneath.
Yellowing
Cause: Epoxy tends to yellow when exposed to UV rays (a frequent occurrence in sunny Texas) or high heat.
Impact: Dulls the floor’s aesthetic, making your garage look worn and old.
Chipping
Cause: Heavy foot traffic, tire friction, or dropping tools can chip or crack the coating, especially near the door threshold or workbench area.
Impact: Besides looking rough, chipped floors can pose safety risks if the edges are sharp or if the concrete starts to break down.
Why It Matters: A failing epoxy floor not only looks run-down but can also allow moisture to seep into the concrete, worsening cracks or contributing to mold and mildew in humid East Texas conditions.
This is a picture of a garage with an epoxy flooring that was failing. It was a DIY kit that was installed by a painter the homeowners hired. He used a kit from a big box hardware store.
Why Polyaspartic Is the Answer
Fortunately, you don’t have to stick with failing epoxy. Polyaspartic coatings offer a modern, high-performance solution that addresses the weaknesses of epoxy while adding new benefits:
Stronger Bond
Better Adhesion: Polyaspartic chemically bonds to properly prepared concrete, reducing the risk of peeling or flaking.
Minimal Downtime: Once applied, polyaspartic cures faster—meaning less chance for dust or moisture to settle onto the surface mid-application.
UV Stable
No Yellowing: Unlike epoxy, polyaspartic is formulated to resist UV damage, so it won’t discolor under constant sunlight or high temperatures.
Consistent Appearance: Whether your garage door is open all day or you have large windows, you can trust your floor to keep its original color.
Fast Cure
Rapid Turnaround: Many projects are ready for light foot traffic in just a few hours.
Back in Action: We recommend waiting a day or two before driving or parking on it to ensure maximum cure—still a fraction of the time epoxy often requires.
Key Benefit: Polyaspartic’s strength, UV stability, and quick cure time mean you can transform your Flint-area garage in record time – without sacrificing quality or durability.
The Upgrade Process
Ready to say goodbye to your old epoxy floor? Here’s a step-by-step look at what upgrading to polyaspartic usually involves:
Removal of Old Coating
Diamond-Grinding or Shot-Blasting: Professionals use specialized equipment to remove the existing epoxy thoroughly. This not only strips away failing material but also profiles the concrete surface for better coating adhesion.
Dust Containment: Modern grinding machines often have vacuum attachments to keep dust levels low, ensuring a cleaner environment.
Concrete Repairs
Cracks and Pits: Any visible cracks, chips, or pits in the concrete are filled and leveled with industrial-grade fillers or patching compounds.
Moisture Checks: If your garage floor shows signs of excess moisture, the team can address drainage or sealing issues to ensure the new coating bonds correctly.
Application of Polyaspartic
Base Coat: A high-quality polyaspartic primer/base coat is spread over the prepared surface, effectively sealing the concrete.
Optional Color Flake Broadcast: If you want a decorative finish, colored vinyl flakes are broadcast onto the wet base coat, providing texture and a unique design.
Final Topcoat: A clear polyaspartic topcoat seals everything in, creating a seamless, glossy, and UV-resistant surface that can handle the rigors of day-to-day garage use.
Pro Tip: If you’re customizing your garage floor, ask about different flake sizes and color blends if you want to show off your favorite sports team or personal branding.
Here is the same area of the flooring after we prepared it, made repairs, and then applied the polyaspartic.
How Polyaspartic Upgrades Boost Your Garage in Flint (and Beyond)
While Flint, TX is just one part of East Texas, the climate conditions here – like heat, humidity, and occasional cold snaps – can wreak havoc on lesser floor coatings. Polyaspartic stands out due to its temperature tolerance and moisture resistance:
Combatting Humidity: The non-porous topcoat prevents moisture from seeping into the concrete, crucial in humid or rainy seasons.
Defending Against Heat: High temperatures can make some epoxy-based floors sticky or cause premature wear. Polyaspartic’s chemical makeup is built for hotter climates, extending its lifespan.
Local Touch:
If you host neighborhood gatherings or use your garage as a workspace, you’ll appreciate that polyaspartic not only looks professional but is also easy to keep clean. A quick sweep or light mopping can remove dust, sawdust, or pollen, keeping your workshop or party-ready space looking sharp for guests.
Additional Benefits to Consider
Safety and Slip Resistance
Textured Surfaces: Adding decorative flakes or slip-resistant additives can provide extra traction, reducing the likelihood of slips or falls – especially if you have kids, pets, or an active household.
Bright, Reflective Appearance: The glossy finish can improve lighting in your garage, enhancing visibility whether you’re working on a DIY project or searching for a tool after dark.
Low Maintenance
Easy Cleaning: Spills from automotive fluids, paint, or household chemicals wipe up easily, helping you maintain a spotless garage floor.
Stain Resistance: Because the surface is sealed, stains are much less likely to set in compared to raw concrete or worn-out epoxy.
Boost in Home Value
Appealing Aesthetics: A fresh, high-quality garage floor can impress potential buyers and add a “wow” factor if you ever decide to sell.
Durability: Prospective homeowners see a well-maintained garage floor as a sign you’ve taken good care of the entire property.
Frequently Asked Questions
Q: Can I DIY the Epoxy Removal and Polyaspartic Installation? A: While DIY might be tempting, professional removal ensures the old coating is fully stripped, preventing future adhesion issues. Polyaspartic also sets quickly, so experience is crucial to get even coverage. A professional install typically yields longer-lasting results with far fewer headaches.
Q: How Long Before I Can Use My Garage Again? A: Polyaspartic typically allows light foot traffic within hours. However, Epoxy Coat Masters recommends waiting a full day or two before parking a car on it. This extra time helps the coating reach full cure, especially beneficial in humid East Texas.
Q: What If I Have Concrete Damage Under My Old Epoxy? A: During the removal process, any cracks, pits, or uneven areas will be addressed. Proper surface prep includes repairing these issues, so your new floor can bond thoroughly and look great.
Don’t Let Failing Epoxy Drag You Down
A peeling, yellowing epoxy floor can undermine the overall aesthetics and practicality of your garage space. More importantly, it can cause further damage to the underlying concrete if not addressed. Upgrading to polyaspartic is a chance to revitalize your garage – giving it a sleek, durable finish that boosts curb appeal and withstands daily wear.
Ready to Upgrade?
Step 1: Contact Epoxy Coat Masters for a consultation. We’ll assess your current floor’s condition and recommend the best approach.
Step 2: Discuss your preferred design – solid colors, decorative flakes, or a custom look.
Step 3: Schedule your installation. Our team works efficiently to minimize downtime, aiming to get you back in your garage as soon as possible.
Step 4: Enjoy your newly transformed garage floor, complete with UV stability, chemical resistance, and a beautiful finish designed for East Texas living.
If you live in Flint, TX or anywhere else in East Texas, a failing epoxy floor doesn’t have to be a permanent eyesore. Polyaspartic garage coatings deliver the strength, look, and longevity your space deserves. Whether you use your garage for parking, as a workshop, or as an extra hangout area, this upgrade will pay off in both function and style.
Don’t let an outdated coating diminish your home’s appeal. Contact Epoxy Coat Masters today to explore how a modern polyaspartic upgrade can bring new life to your garage – and keep it looking impeccable for years to come.
When homeowners in Tyler, TX want a garage or patio floor that looks beautiful and stands up to real life, they turn to Epoxy Coat Masters. Known across East Texas for exceptional workmanship and lasting results, the company delivers a level of quality that sets them apart from ordinary epoxy installers. Why Tyler Homeowners Choose…
Emerald Bay homeowners seeking professional garage floor coating services trust Epoxy Coat Masters for their extensive experience in the area and specialized expertise in decorative concrete flooring systems. Why Emerald Bay Residents Choose Epoxy Coat Masters With numerous successful installations throughout Emerald Bay, Epoxy Coat Masters has become the neighborhood’s go-to specialist for garage floor…
A high-quality garage floor coating is more than just a cosmetic upgrade; it can boost your home’s value, protect the underlying concrete, and create a clean, functional space. Whether you’re opting for a polyaspartic floor coating or still considering epoxy, proper surface preparation is absolutely crucial for achieving long-lasting, professional-grade results. Below, we’ll walk you…
For years, “epoxy flooring” has been the go-to for homeowners seeking durable, glossy surfaces – particularly in garages, workshops, and commercial settings. However, a new contender is taking center stage: polyaspartic. Whether you live in Whitehouse, Tyler, Longview, or beyond, polyaspartic flooring is proving itself to be a faster, longer-lasting, and more UV-resistant solution that’s…
Hideaway homeowners upgrading their outdoor living spaces consistently choose Epoxy Coat Masters for professional patio concrete coatings that withstand lakeside conditions while delivering stunning visual appeal. Why Hideaway Trusts Epoxy Coat Masters for Patios With extensive experience throughout Hideaway, Epoxy Coat Masters understands the unique demands of lakeside outdoor living. Their UV-resistant polyaspartic coating systems…
A pool is a backyard centerpiece – especially in East Texas, where hot summers call for constant dips in cool water. But the concrete surrounding your pool can become an eyesore if it cracks, stains, or becomes dangerously slick. So, what’s the best refinishing method? Many folks consider “epoxy,” but is it truly suitable for…
